USW-Lite-8-POE Ubiquiti Lite 8-Ports Layer2 UniFi PoE Switch
Condition: New
Mfr Part#: USW-Lite-8-PoE
UPC: 810010071101
Availability: IN STOCK
$277.40
Quantity:
- Payment Type Via:
-
![Payment Methods]()
-
![Loader]()
Ubiquiti UniFi Switch Lite 8 PoE USW-Lite-8-PoE Ethernet Switch
8 Ports - Manageable - 2 Layer Supported - 8 W Power Consumption - 52 W PoE Budget - Twisted Pair - PoE Ports - Wall Mountable
The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices.
The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices.
Managed and configured by the UniFi Network Application with UniFi mobile app support, the USW-Lite-8-PoE offers Layer 2 switching protocols and features. The UniFi Network Application and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.
Features
- (8) Gigabit RJ45 ports including (4) 802.3af/at PoE ports
- Managed by UniFi Network Application (5.13.10 or later)
- External 60W power adapter
- Wall-mountable (Kit included)
Technical Specifications
| Hardware | |
|---|---|
| Management interface | Ethernet In-Band |
| Networking interface | (8) GbE RJ45 ports |
| PoE interface | (4) PoE/PoE (Pins 1, 2 ; 3, 6-) |
| Total non-blocking throughput | 8 Gbps |
| Switching capacity | 16 Gbps |
| Power method | 54V DC, 1.1A power adapter |
| Power supply | 54V, external, 60W |
| Supported voltage range | 50—57V DC |
| Max. power consumption | 8W (Excluding PoE output) |
| Total available PoE | 52W* *With an external 60W power adapter. |
| Max. PoE wattage per port by PSE | PoE : 30W |
| Button | Factory reset |
| Ambient operating temperature | -15 to 40° C (5 to 104° F) |
| Ambient operating humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| Switching Features | |
| Layer 2 features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 features | – |
| LEDs | |
| System | Status |
| Ethernet | PoE Speed/link/activity |
| PoE | Link/activity |
| Application Requirements | |
| UniFi Network | Version 7.2.94 and later |
Description
Ubiquiti UniFi Switch Lite 8 PoE USW-Lite-8-PoE Ethernet Switch
8 Ports - Manageable - 2 Layer Supported - 8 W Power Consumption - 52 W PoE Budget - Twisted Pair - PoE Ports - Wall Mountable
The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices.
The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices.
Managed and configured by the UniFi Network Application with UniFi mobile app support, the USW-Lite-8-PoE offers Layer 2 switching protocols and features. The UniFi Network Application and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.
Features
- (8) Gigabit RJ45 ports including (4) 802.3af/at PoE ports
- Managed by UniFi Network Application (5.13.10 or later)
- External 60W power adapter
- Wall-mountable (Kit included)
Technical Specifications
| Hardware | |
|---|---|
| Management interface | Ethernet In-Band |
| Networking interface | (8) GbE RJ45 ports |
| PoE interface | (4) PoE/PoE (Pins 1, 2 ; 3, 6-) |
| Total non-blocking throughput | 8 Gbps |
| Switching capacity | 16 Gbps |
| Power method | 54V DC, 1.1A power adapter |
| Power supply | 54V, external, 60W |
| Supported voltage range | 50—57V DC |
| Max. power consumption | 8W (Excluding PoE output) |
| Total available PoE | 52W* *With an external 60W power adapter. |
| Max. PoE wattage per port by PSE | PoE : 30W |
| Button | Factory reset |
| Ambient operating temperature | -15 to 40° C (5 to 104° F) |
| Ambient operating humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| Switching Features | |
| Layer 2 features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 features | – |
| LEDs | |
| System | Status |
| Ethernet | PoE Speed/link/activity |
| PoE | Link/activity |
| Application Requirements | |
| UniFi Network | Version 7.2.94 and later |
More Information
| Mfr Part#: | USW-Lite-8-PoE |
|---|---|
| Brand Name | Ubiquiti |
| General Information |
USW-Lite-8-PoE Ubiquiti is priced at $277.40 Order the product online to get free ground shipping. for more information about shippping & return, please see our Shipping policy. |
| Weight | 3 LBS |
| Condition | New |
WARRANTY AND REFUND INFORMATION
We offer 30 Days warranty, return for replacement or refund.
Related Products
